
parts made by
for
steam model engines
(12) Standard Safety Valve 1/4" £7.75
(14) Safety Valve SE1. SE2, SE3 3/8"
for the Old Models £8.50
(16) Standard Whistle Assembly £7.75
(19) Water Level Plug(non sight glass models) £4.50
(20) Selection of washers for all fittings 20 £1.75
((35) Standard Piston/Cylinder Assembly
(Piston 1.25" long) £10.00
(37) Piston/Cylinder Assembly SP4
(Piston 2.5" long) £11.00
(42) Standard Flywheel (2” diameter) £7.50
(43) Flywheel SP4 £7.50
((44) Central Pulley Wheel WS1 £5.50
(46) Crankshaft SP2 (2.5" long) £3.25
(47) Crankshaft SP4 (2.5" long) £3.75
(49) Crankshaft SR1a, TE1a, SW1 (3.5" long) £3.75
(55) Pulley SA1, SP4 1/2" £2.25
((55a) Pulley 3/4" £2.25
(55b) Pulley 1" £2.50
(62a) Flexible Driving Belt SR1a, TE1a £1.50
(62b) Flexible Driving Belt Unjoined 12" for
general use (pack of 5) £6.00
(63) Flexible Driving Belt (2) SW1 £2.50
(64) Flexible Driving Belt (2) SA1 £2.50
(72a) 50ml Large Syringe for water fill boiler £2.00
(72c) 10ml Syringe for oiling £0.50
(74) Burner Tray for cubes SA1, FE1, DV1,
DV2, LB1 £5.75
(74a) Burner Tray with handle for cubes SR1a,
TE1a, SW1 £6.50
(74b) Burner Tray for cubes SP2, SP4 £6.50
(74c) Meths Burner Tray Old Type TE1a, SR1a £12.00
(74d) Meths Burner Tray Old Type Narrow
for Minors, etc. £10.00
(74e) Meths Burner Tray SP3 £12.50
(75) Burner Tray for Cubes SP5 £9.75
(75a) Meths Burner Tray SP5 £13.50
(76) Meths Burner Tray Two Wick £15.00
(77 Meths Burner Tray One Wick £13.50
78) Meths Burner Tray Three Wick £19.50
(79) Burner Tray for cubes for Minors £6.50
(80) Shield for Burner Tray Chrome £1.50
(95) Front Roller 2 complete with shaft SR1a £11.50
(96) Rear Wheel SR1a (each) £9.00
(97) Front Wheel TE1a, SW1 (each) £7.50
(98) Rear Wheel TE1a (each) £10.50
(42) Standard Flywheel (2" dia) £7.50
(43) Flywheel SP4 £7.50
(110) Rear Wheel SW1 £12.00
(113) Wheel complete with tyre SA1 £8.50
(113a) Wheel complete with tyre FE11 £8.50
(115) Rubber Tyre SA1 £4.50
(127) Steering Rod SA1 £7.50
(99) Hub Caps Small (2) Chrome £1.50
(100) Hub Caps Large (2) Chrome £1.50
(101) Front Fork Assembly SR1a £10.50
(102) Front Fork Assembly TE1a & SW1 £10.75
(103) Steering Rod (10" long) SR1a £7.75
(104) Steering Rod (10" long) TE1a & SW1 £7.00
104a Steering Rod (20" long)TE1a, SW1, SR1 £10.50
(105) Canopy TE1a £15.50
(105a) Canopy Support
(state old or new model) TE1a £4.50
(105c) Clip for Canopy Support(older model) £2.50
(105b) Canopy Clips for old type TE1a £1.50
(109) Reverse Lever SR1a, TE1a, SW1 £3.50
(128) Standard Sight Glass Assembly £5.00
(129) Solid Fuel 20 Spirit Tablets per box £3.00
(130) Steam Engine Lubrication Oil (125ml)
& Syringe £3.00
(131) Stub Springs for front axle £1.75
(132) Tacky Labels Mamod Made in England
in silver on black 1.5" x 0.75" SA1 £0.50
(132b) Self Adhesive Labels Canopy in red on
gold (2) TE1a £2.00
(133) Tacky Labels Warning in silver on black
size 1 1/2" x 3/4" £0.50
(137) Nut & Spring for Front Axle £1.50
(138) Dome for Steering Rods £1.00
(139) Wheels for Grinder (2) £2.25
(140) Wheels for Polisher (2) £1.25
(141) 6 Barrels for SW1 Wagon £18,00
(141a) 1 Barrel for SW1 Wagon £3.25
(14)5 Boiler TE1a £17.50
(158) Car Seat Assembly complete with back SA1 £10.50
(159) Chimney Stack SP models £8.50
(160) Chimney Stack (brass) SE3 £10.50
(161) Chimney Stack (Brass) SE2/1 £9.50
(162) Chrome Rear Cowl Box TE1a, SR1a £9.50
(163) Black Rear Box TE1a, SR1a.
with hole for glass £8.50
(164) Chrome Bonnet SA1 £8.50
(167) Headlight SA1 (each) £3.00
(169) Mounting Bracket for Crankshaft TE1a &
SR1a with 3 copper pipes attached. £9.75
(174) Flywheel SA1 £7.50
(176) Tow Bar for Trailer £2.50
(177 Copper pipe 1/8” (12” lengths) £2.50
(178) Brass Bands boilers for all models £2.50
(180) Pop Rivets 3/32''x 6mm pack of (25) £2.25
(180a) Pop Rivets 2/4 x 4mm pack of (25) £2.25
(180b) Pop Rivets copper pack of 10 £2.25
(182) Chains holding logs on wagon (2) £1.75
(183) Rubber Tyres for better grip TE1a(5) £4.50
(184) Rubber Tyres for better grip SR1 (5) £4.50
(185) Rubber Tyres for better grip SW1(4) £.4.50
(187) Canopy for SR1a £16.50
(189) Brass Windscreen Frame £8.50
(190) Axle rid £2.50 ** If you can not find the part you require in the list please enquire whether it is available or not. ** ** Please note all spare parts order over £75.00 post FREE ** ©
July 2008
(62) Flexible Driving Belt Unjoined for
general use £1.50
(72) Filler Funnel £1.75
Burner Trays
Wheels/Steering
Canopy
(106) Scuttle SR1a, TE1a, SW1 £10.75
Stickers
(136) Chimney Stack TE1a £8.50
Rivets
(181) Length of Wick (6") £1.50
Rubber Tyres
(186) Brass chimney cowl TE1a, SR1a & SW. £3.25
**All spare parts order over £75.00 post FREE **.
WINDSCREEN FRAME
FOR WHEELED LIVE STEAM MODELS
Brass windsrceen frames for use on, Fire engine FE1 Roadster SA1 plus London bus LB1, easy to fit. £8.50 STEERING ROD FOR WHEELED LIVE STEAM MODELS
Extra long steering rods, just fit the 2 rods together to make one rod 22" long or it can be used just as 1
making
11" long. This saves a lot of bending down. Can be fitted to most wheeled models, Traction Engine TE1a, Steam Roller
SR1, Steam Wagon SW1a plus Showman's Engine SHO1. £10.50
EXTRA LONG 

£2.50 each

Wheeled Models £10.00 Stationary Model £10.00

£10.50

Roller Front Wheels (2)
£18.00

Roller Rear Wheel
£13.50 each

Traction Rear Wheel
£9.50 each

Wagon Drive Rear Wheel
£10.50 each

Wagon Rear Wheel
£12.00 each


50ml.
£2.00 - 10ml. 50p

These "Hub Caps" will fit all the Mamod wheeled models axles. There are two different sizes large and small shown plus two different colours.The black hub caps are used on, all trailers, Post Office Van and the Limousine or the chrome ones can be used on the other models.It is generally a matter of personal preference which type you use, with the black ones are easier to fit and take off. You can decide which hub caps you want to fit to your model.When ordering state which ones you want colour and size, can be mixed.

Price for set of 2 £1.50
Set of 4 £2.75

Large Safety Valve 3/8"
£8.50 - Collar
£1.50

Safety Valve 1/4" £7.75 - Collar
£1.50


TE1a Canopy
£15.50

Supports
£4.50

Reverse Lever
£3.50

£17.50 complete

Meth Burner Tray
£12.00


Headlights
£3.00 each

Solid Fuel Buner Tray
£6.50

Stub Spring
£1.75

Scuttle
£10.75

Front Assembly
£10.75




Steering Rod
£7.00

Whistle
£7.75

Extra Long Steering Rod £10.50
Brass Chimney Stack Cowl £3.25 2 Front Wheels for Steam Wagon £19.00 Nut & Spring for Front Fork £1.50 Brass Dome for Steering Rod £1.25




125 ML. BOTTLE
SQUEEZE EASY WITH RESEALABLE SPOUT

Made for use all live steam models Mamod or Wilesco plus all other models, special steam cylinder oil 125ml. compound 460T, plus a spout for oiling up.
With a new resealable cap to go on the spout plus with the squeeze easy bottle.
The oil makes your models steam much longer and runs better. £2.75 per bottle